Architect handwriting practice
Print PLAN EAST on two rows, leaving a little air between capitals. Compare cap height and upright stems as you would on a drawing label.
- Cap height
- 64.0 px
- Height variation
- 3%
- Tilt from vertical
- 0.0°
24 separate ink shapes · 23 near-vertical stems. Height variation is the spread relative to the mean height.
Print PLAN EAST between the dotted cap lines and the solid baselines on two or three rows.
Lettering a drawing label
Set a cap line above the baseline. Run the verticals of E and L between the two, then add crossbars. Keep the bowl of P open and leave a gap between the two words large enough to see at a reduced drawing scale.
Engineering handwriting
An engineer’s dimension note and an architect’s room label share a practical aim. A reader should be able to tell a 1 from an I and a 0 from an O after the drawing is copied. Try those pairs beside the label at its final printed size.
Questions
Why use only capitals for this check?
With separated capitals of one size, letter-box heights can be compared directly. Lowercase ascenders and descenders would introduce intentional height differences.
Must every stroke be vertical?
No. Check upright stems such as the spine of E. The diagonal legs of A and the curve of S have different jobs.
What if two letters touch?
Leave a small gap and repeat the label. A connected pair can be measured as one ink shape.